Colorado Springs Auto Repair

No, ERG isn’t the sound a pirate makes.  It’s a part in your vehicle that recirculates exhaust gas to reduce certain gases and pollutants in the atmosphere.  In fact, ERG stands for “Exhaust Gas Recirculation.” One gas our vehicles may make when they burn fuel is nitric oxide, which can play a big role in creating smog and acid rain.  It’s better for our planet if our vehicles aren’t spewing that into the air.   One inventive way of reducing it is by taking the exhaust and channeling it back to the vehicle’s air intake system. When it travels through the engine again, its composition is changed, and it comes out cleaner.  It also helps the engine be more efficient. The EGR valve can fail after a while, and some signs you may notice are the engine is miss firing, it may suddenly lose power or your Check Engine light may come on.  You may also see your fuel economy decrease or hear your engine knock. A bad EGR valve ... read more

Steering a vehicle these days doesn't take much effort, but if you got behind the wheel back before power steering was invented, you'd need to practically have the strength of Hercules to turn the wheel.    The first power steering systems widely available changed everything.  Chrysler introduced its Hydraguide power system in 1951. The "hydra" was for a hydraulic pump. It pressurized fluid that multiplied the force applied to the steering wheel so it was easier to turn the wheels on the ground. That pump got power from a belt attached to the engine, but unfortunately it wasted a lot of energy in the process. Plus, the system of hoses and pumps required a fair amount of maintenance and repair. Some say this system provides the most "natural" steering experience of power systems. Recently, automakers have turned to electric power steering.  It gets its power from the car's electrical battery and charging system and uses an electric motor to turn the wheels.  Sin ... read more

Think of how many times you put your foot on your vehicle’s brake pedal every day.  And think of how much you rely on your brakes to slow down and stop your momentum.  When it comes to safety systems, your brakes are at the top of the list, and that’s why it’s so important to keep them in top condition. Brakes are something you make sure you keep maintained before they start showing signs of problems. Some of those signs are a grinding sound when you step on the brake pedal, your vehicle pulling to one side when you brake, you don’t feel your brakes stopping you as quickly as they used to, or you notice the brake light is illuminated on your instrument panel.  We ask a lot of our brakes.  They have to work no matter how hot or cold it is outside.  That means whether it’s sunny, snowing, raining, or icy; you’re traveling at highway speeds or school-zone speeds; or when suddenly you find yourself trying to avoid hitting another ... read more

If you have a front-wheel-drive vehicle, it has components called CV joints which enable you to turn your wheels smoothly. The CV stands for “constant velocity.” In essence, it’s a set of gears that connect a shaft that allows power from the transmission to be sent to the wheels.  When you turn the wheels, no matter what angle, the input velocity rotation will be equal to the output. Thus, the name, CV (constant velocity) joint. Other vehicles with 4-wheel drive and all-wheel drive also use CV joints.   If one of your CV joints isn’t working right, you may find your vehicle difficult to handle.  If one breaks, your vehicle may stop moving.  So, it’s important that CV joints be in top working condition.  The joints need a lot of lubrication, so they are surrounded by grease.  There’s a rubber enclosure around them called the boot which holds the grease in and protects CV joints from the elements. 
 
The bi

... read more